![NOTICE - Dallas Area Classic Chevys Message Board Will Soon Be Deactivated Forum Index](templates/subSilver/images/logo_phpBB.gif) |
NOTICE - Dallas Area Classic Chevys Message Board Will Soon Be Deactivated The function of this message board has become unstable with no way to update and will be disabled soon.
|
View previous topic :: View next topic |
Author |
Message |
David Graves Site Admin
![](http://www.dallasclassicchevy.com/images/00%20Misc%20personal/dag%20avatar.jpg)
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Wed Jan 19, 2011 9:28 am Post subject: WRENCHES Project - Saturday Jan 22 |
|
|
Our next WRENCHES Project is Saturday January 22nd beginning at 9AM and this will be a total front end rebuild on James Sparrow's '56 Bel Air. The plan is to replace all the upper/lower control arm bushings, upper/lower ball joints and new springs. James lives in Prosper, which is just north of Frisco. For specific address info, contact Bill Preston or Don Andre at WRENCHES@DallasClassicChevy.com or you can call Bill at (405) 412-0502. This will be a great opportunity to lend your knowledge and skills or learn what it takes to do a front end rebuild on a Tri Five Chevy so plan to join the WRENCHES effort Sat 1/22 at 9AM! _________________ In My Garage -
'55 Bel Air Hardtop
'55 Bel Air 2dr Sedan
'56 Corvette
'67 Camaro RS
'69 Blown 427 nostalgia front engine dragster
'17 Indian Chief Vintage |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
57boxman Bel Air
![](http://i275.photobucket.com/albums/jj311/ars2758/424508_348283938547507_1212008722_n.jpg)
Joined: 13 Jun 2005 Posts: 714 Location: The Colony, Texas
|
Posted: Sat Jan 22, 2011 10:10 pm Post subject: |
|
|
The wrenches was a big success today with completing James' front end on his 56. A good group of 7 club members were in attendance. _________________ Texas Classic Chevy Experience
http://www.texasclassicchevyexperience.com/ |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
acardon Bel Air
Joined: 12 Jul 2005 Posts: 273 Location: Southlake, Tx.
|
Posted: Sun Jan 23, 2011 12:18 pm Post subject: |
|
|
And the food was great. ![Very Happy](images/smiles/icon_biggrin.gif) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
David Graves Site Admin
![](http://www.dallasclassicchevy.com/images/00%20Misc%20personal/dag%20avatar.jpg)
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Tue Feb 01, 2011 9:46 pm Post subject: |
|
|
got this note from James Sparrow on the WRENCHES effort with his '56 ..
This is my story and I’m sticking to it.
I’ve been told that winter is a good time to do old car projects. Since I don’t drive my car much in the cold and wet winter weather I decided I would overhaul the front end of my 56. I wanted to do the repairs in my garage so I started taking inventory on the tools I would need, realizing there were quite a few required. I had just read in the DACC monthly news letter that if you needed some help or mechanical expertise, it was just a phone call away. I decided to call “DACC WRENCHES”, headed up by Bill Preston and Don Andre and ask them if I could borrow a few tools. Immediately Bill said “Sure” but asked, “What are you doing and when do you plan to start?” I told him truthfully that I was not real sure but that I was attempting to change out the bushings in my front end.
The next thing I knew, Bill was calling me back asking for directions to my house so that he and numerous DACC guys could come over and help. I was certainly overwhelmed when seven guys showed up around 9:00 a.m., ready to help with my project. After a few fresh donuts and a couple cups of coffee, the fun began. We took a long lunch break and by 4:30 p.m. the car was finished. This was a total team effort that would have taken me more than one day to complete. When working on cars, “fun” is measured by the amount of tools that are still in the toolbox at the end of the day. Take it from me, we had a BLAST!!!
My appreciation goes out to all involved. I feel the most important things that I received besides getting my car repaired, was the fellowship with club members and all their mechanical know-how. If you need some help or some great knowledge about Tri-Fives, I guarantee “WRENCHES” can come up with a solution that will get the job done.
![](http://i167.photobucket.com/albums/u158/DACCphotos/WRENCHES/Spar03.jpg) _________________ In My Garage -
'55 Bel Air Hardtop
'55 Bel Air 2dr Sedan
'56 Corvette
'67 Camaro RS
'69 Blown 427 nostalgia front engine dragster
'17 Indian Chief Vintage |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|