View previous topic :: View next topic |
Author |
Message |
David Graves Site Admin
![](http://www.dallasclassicchevy.com/images/00%20Misc%20personal/dag%20avatar.jpg)
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Mon Oct 25, 2010 9:50 pm Post subject: SHOW US / TELL US about your projects! |
|
|
ok .. here is mine to start it off ..
I have owned this '55 for 35 years, the first 5 years I drove it as my everyday car, then it has gone through a number of stages in attempts to restore modify and improve what was there. Slowly (and I mean SLOWLY) it is coming together once again. (for the full story of the past go to http://www.dallasclassicchevy.com/FeatureCar0408Graves.htm)
Here is the latest, about to get some paint in the trunk
It now has a new 4:56 Ford 9 inch Detroit Locker, a Hughes Performance T400 behind the small block that is sporting 4 two barrell Dellorto carbs. It has been off the frame again, all the candy blue was painted underneath and on the firewall, frame painted (AGAIN) and body put back on. A rollbar was added and now SLOWLY but surely work towards getting it running for the strip. Once together, see what it will run and from there likely make some changes to make it quicker (the goal is to run in the mid to low 11's in the quarter). Paint will be Coral and Shadow Gray with a 'Resto Race Car' theme.
OK - NOW LET'S HEAR ABOUT AND SEE YOUR PROJECT! _________________ In My Garage -
'55 Bel Air Hardtop
'55 Bel Air 2dr Sedan
'56 Corvette
'67 Camaro RS
'69 Blown 427 nostalgia front engine dragster
'17 Indian Chief Vintage |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
57boxman Bel Air
![](http://i275.photobucket.com/albums/jj311/ars2758/424508_348283938547507_1212008722_n.jpg)
Joined: 13 Jun 2005 Posts: 714 Location: The Colony, Texas
|
Posted: Sun Nov 14, 2010 11:03 pm Post subject: |
|
|
I am working on fixing my 750 Holley carburetor. The secondary float bowl's zinc lining delaminated filling the bowl with metal parts and holding down the float which made gas leak all over the place. I replaced the bowl and the needle valve but now the inlet fitting is leaking requiring me to order a new gasket.
I would be finished installing a new wire harness however, the ignition switch is messing up along with the speedometer and tachometer not working which is keeping me from putting every thing back together and cleaning things up. Once I get the carburetor fixed I'll get back to the harness. _________________ Texas Classic Chevy Experience
http://www.texasclassicchevyexperience.com/ |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
2NDTIMEAROUND Bel Air
![](http://www.dallasclassicchevy.com/images/jody.jpg)
Joined: 12 Feb 2007 Posts: 71 Location: Mesquite, Tx.
|
Posted: Mon Jan 03, 2011 11:23 pm Post subject: |
|
|
My project is much like Davids. I've had my 55 2-door post Bel-Air since 1975. It was my daily driver in high school as well as being the class project in my Paint & Body Class in 1976. My son and I rebuilt the engine so he could drive it to high school his Senior year (2008). So now after raising two kiddos, it's time for the car to get it's makeover. I've taken it to Rondos Custom Rodz in Trenton,Tx. It's been hard to see it get cut up, however, it was necessary to get rid of all the rust. So, it's currently in the process of getting new Quarter Panels, Rocker Panels, and two new front Floor Pans. I'm anxious to see it start going back together. I'll try to figure out how to get some photos added. Can someone give me directions for adding pic's?
Thanks
Updates to come. _________________ "Getting older is inevitable......acting your age is a choice....I choose not to! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
fiftysixbowtie Bel Air
![](http://thumb0.webshots.net/t/62/762/8/60/28/2854860280056691280jWOrvu_th.jpg)
Joined: 06 Jun 2005 Posts: 67 Location: Plano
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
2NDTIMEAROUND Bel Air
![](http://www.dallasclassicchevy.com/images/jody.jpg)
Joined: 12 Feb 2007 Posts: 71 Location: Mesquite, Tx.
|
Posted: Tue Jan 04, 2011 11:05 pm Post subject: |
|
|
Ok. Here's my attempt at attaching photos of the work done on my car.
Here's the "Before" pictures
Many thanks to son, brother and nephew for the muscle and the trailer.
And so it begins!
This is really hard to see after being able to drive it the week before.
Ok...that's better!
The same song-second verse. Quarters, Rockers and Front Floor Pans
More to come after this weeks visit. _________________ "Getting older is inevitable......acting your age is a choice....I choose not to! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
David Graves Site Admin
![](http://www.dallasclassicchevy.com/images/00%20Misc%20personal/dag%20avatar.jpg)
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Wed Jan 05, 2011 7:38 am Post subject: |
|
|
John - we need pictures! something like your dash all ripped apart and wires hanging everywhere! Then of course the pretty one when it's all done!
Jody - that's some MAJOR surgery there! More photos as you go! _________________ In My Garage -
'55 Bel Air Hardtop
'55 Bel Air 2dr Sedan
'56 Corvette
'67 Camaro RS
'69 Blown 427 nostalgia front engine dragster
'17 Indian Chief Vintage |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
fiftysixbowtie Bel Air
![](http://thumb0.webshots.net/t/62/762/8/60/28/2854860280056691280jWOrvu_th.jpg)
Joined: 06 Jun 2005 Posts: 67 Location: Plano
|
Posted: Wed Jan 05, 2011 11:00 am Post subject: |
|
|
Sorry, David. Too late. It wasn't a pretty sight. LOL. _________________ John Rush |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
2NDTIMEAROUND Bel Air
![](http://www.dallasclassicchevy.com/images/jody.jpg)
Joined: 12 Feb 2007 Posts: 71 Location: Mesquite, Tx.
|
Posted: Fri Jan 07, 2011 11:36 pm Post subject: |
|
|
Here are a few photos of the dash and items we found when we first rebuilt the engine and cleaned the gas tank. Hopefully, more pic's tomorrow.
Sorry, I've tried re-sizing the photos....haven't been successful. _________________ "Getting older is inevitable......acting your age is a choice....I choose not to! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
2NDTIMEAROUND Bel Air
![](http://www.dallasclassicchevy.com/images/jody.jpg)
Joined: 12 Feb 2007 Posts: 71 Location: Mesquite, Tx.
|
Posted: Sun Jan 30, 2011 11:57 pm Post subject: |
|
|
Well here are latest photos of the progress. The rear quarters are mostly welded on, the Rockers are welded on and all of the gaps look good. It's starting to look like a car again.
![](http://i279.photobucket.com/albums/kk146/2ndtimearound_photos/SS-2.jpg) _________________ "Getting older is inevitable......acting your age is a choice....I choose not to! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
2NDTIMEAROUND Bel Air
![](http://www.dallasclassicchevy.com/images/jody.jpg)
Joined: 12 Feb 2007 Posts: 71 Location: Mesquite, Tx.
|
Posted: Fri Feb 25, 2011 11:28 pm Post subject: |
|
|
Well the car has had sealer sprayed and the bodywork done to the top, Lf & Rt Doors. Headlight patch caps are on the way. I should be getting the rolling frame with motor & tranny back next week.
![](http://i279.photobucket.com/albums/kk146/2ndtimearound_photos/2-22-11Sealer_2.jpg) _________________ "Getting older is inevitable......acting your age is a choice....I choose not to! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
2NDTIMEAROUND Bel Air
![](http://www.dallasclassicchevy.com/images/jody.jpg)
Joined: 12 Feb 2007 Posts: 71 Location: Mesquite, Tx.
|
Posted: Tue Mar 08, 2011 10:45 pm Post subject: |
|
|
Well all of the body work is done except for the hood and trunk lid. After that, it will be ready for "undercoating" underneath and Lizardskin inside. Hopefully, the frame will come home this week. It's really going to be nice that the 56 years of grease and gunk is gone! I better get busy with my stainless polishing.
![](http://i279.photobucket.com/albums/kk146/2ndtimearound_photos/3-4-11_2.jpg) _________________ "Getting older is inevitable......acting your age is a choice....I choose not to! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
2NDTIMEAROUND Bel Air
![](http://www.dallasclassicchevy.com/images/jody.jpg)
Joined: 12 Feb 2007 Posts: 71 Location: Mesquite, Tx.
|
Posted: Sun Apr 24, 2011 10:26 pm Post subject: |
|
|
Sorry I haven't posted an update for a while. Just wanted to have some progress to report. There's undercoat underneath and LizardSkin Ceramic coating on the interior floor. The final "blocking" should be done and the final coat of primer before paint should applied by now. Hopefully, there'll be some color cut-in next week. Here are a few pics of where things stand. It all points to me getting my butt in gear on running the lines on the frameand continue to polish the stainless.
![](http://i279.photobucket.com/albums/kk146/2ndtimearound_photos/4-18-11_Framehome.jpg) _________________ "Getting older is inevitable......acting your age is a choice....I choose not to! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
2NDTIMEAROUND Bel Air
![](http://www.dallasclassicchevy.com/images/jody.jpg)
Joined: 12 Feb 2007 Posts: 71 Location: Mesquite, Tx.
|
Posted: Wed May 18, 2011 10:56 pm Post subject: |
|
|
Hey Guys! It's been a while since my last post. Well here she is starting to get some color on her. It very exciting to see it get to this stage after all of the surgery it's had. As I'm sure you can tell, it's setting on a "Donor Frame". More to come when the exterior gets paint. I think it's safe to say that it won't make it to the Lonestar Show this weekend.javascript:emoticon(' ')
White with Blue Pearl _________________ "Getting older is inevitable......acting your age is a choice....I choose not to! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
2NDTIMEAROUND Bel Air
![](http://www.dallasclassicchevy.com/images/jody.jpg)
Joined: 12 Feb 2007 Posts: 71 Location: Mesquite, Tx.
|
Posted: Thu Jun 16, 2011 11:36 pm Post subject: |
|
|
Ok folks. Here's the debut of the painted exterior. The body was just set back down on her this morning. I'm very pleased with the finished body work and paint job. It still has to be buffed out, then comes some new glass (and some new wheels at some point). Not to mention sound mat, wiring, interior. It's getting there. Sorry about the different pic sizes.
![](http://i279.photobucket.com/albums/kk146/2ndtimearound_photos/6-16-11PaintedBody-4.jpg) _________________ "Getting older is inevitable......acting your age is a choice....I choose not to! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
2NDTIMEAROUND Bel Air
![](http://www.dallasclassicchevy.com/images/jody.jpg)
Joined: 12 Feb 2007 Posts: 71 Location: Mesquite, Tx.
|
Posted: Mon Aug 22, 2011 9:48 pm Post subject: |
|
|
Greeting All!! Well Here's the latest. The trim is going back on. Should be getting transferred to the glass-man later this week. Then a much awaited trip back here to the house. I don't think we'll be ready for the Reliable Show next month. lol
The front end went on today...no pics yet.
The small door spear looks out alignment because the door is not closed.
![](http://i279.photobucket.com/albums/kk146/2ndtimearound_photos/8-20-11_8.jpg) _________________ "Getting older is inevitable......acting your age is a choice....I choose not to! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|