View previous topic :: View next topic |
Author |
Message |
belairvette Bel Air
Joined: 18 Oct 2005 Posts: 159 Location: Granbury, Texas
|
Posted: Sat Jan 20, 2018 9:47 am Post subject: RAMJET HIGH IDLE |
|
|
High idle at start-up. Slows some after warm-up but still over 1000 rpm. Solution? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
acardon Bel Air
Joined: 12 Jul 2005 Posts: 273 Location: Southlake, Tx.
|
Posted: Sat Jan 20, 2018 5:51 pm Post subject: |
|
|
Did you set the timing at 10 degrees with the diagnostic tool in "diag"?
The timing mark is zero so you have to put another mark on the damper (9/16" from zero) if you don't have a "dial-back" timing light. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
belairvette Bel Air
Joined: 18 Oct 2005 Posts: 159 Location: Granbury, Texas
|
Posted: Sun Jan 21, 2018 7:47 am Post subject: Ram Jet High Idle |
|
|
Thanks. I’ll try to check that. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
belairvette Bel Air
Joined: 18 Oct 2005 Posts: 159 Location: Granbury, Texas
|
Posted: Sun Jan 21, 2018 8:05 am Post subject: Ram Het High Idle |
|
|
Idle after warm-up now: 800-825 rpm. Is that where it should be? Seems like it should be lower?6 |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
acardon Bel Air
Joined: 12 Jul 2005 Posts: 273 Location: Southlake, Tx.
|
Posted: Mon Jan 22, 2018 8:55 am Post subject: |
|
|
My RamJet idles between 750 and 800, best I can tell on my small tach. It does seem faster than it needs to be. I thought about getting it tuned, to get better milage, HP and slower idle, but I've also heard stories about having it tuned has caused other problems. Mine is doing great, so I hate to kick any sleeping dogs.
P.S. Any body with a RamJet, please respond. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
David Graves Site Admin
![](http://www.dallasclassicchevy.com/images/00%20Misc%20personal/dag%20avatar.jpg)
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Mon Jan 22, 2018 10:01 am Post subject: |
|
|
Mine will idle around 800 also. I randomly and on rare occasions get a high idle RPM (1200 or so) when I first start it up, but it will fall back to normal in less than a minute. There are times when I first start it, begin driving with the AC on and I come to a stop (manual tranny) it will die and it restarts with no issue and will be fine afterwards. And that is only with the AC on, no AC on and I never have that issue. _________________ In My Garage -
'55 Bel Air Hardtop
'55 Bel Air 2dr Sedan
'56 Corvette
'67 Camaro RS
'69 Blown 427 nostalgia front engine dragster
'17 Indian Chief Vintage |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Briney Bel Air
![](http://i122.photobucket.com/albums/o271/briney_album/55Chevy/55_zpswj26wuf6.jpg)
Joined: 23 Oct 2014 Posts: 57 Location: Richardson
|
Posted: Tue Jan 23, 2018 3:42 pm Post subject: |
|
|
Mine is around 800 - 815 _________________ Thanks,
Patrick |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
belairvette Bel Air
Joined: 18 Oct 2005 Posts: 159 Location: Granbury, Texas
|
Posted: Wed Jan 24, 2018 4:35 pm Post subject: RamJet 350 High Idle |
|
|
Well, I'm going stop worrying about the idle rpm. 800-825 seems normal. after first 20 miles, I had a leak front and back on the oil pan and the rear diff was leaking, so fixed both. Changed to an aluminum pan to eliminate flex. Found some crud in the old pan? No metal though. Tack-welded the oil pickup tube to be safe. While I had it up, had a H-pipe welded in. Now on to the Upholstery shop...![](http://pic20.picturetrail.com/VOL1325/13757314/24794993/413747441.jpg) ![](http://pic20.picturetrail.com/VOL1325/13757314/24794993/413747439.jpg) [img]/pic20.picturetrail.com/VOL1325/13757314/24794993/413747418.jpg[/img]![](http://pic20.picturetrail.com/VOL1325/13757314/24794993/413747416.jpg) ![](http://pic20.picturetrail.com/VOL1325/13757314/24794993/413747415.jpg) ![](http://pic20.picturetrail.com/VOL1325/13757314/24794993/413709191.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
acardon Bel Air
Joined: 12 Jul 2005 Posts: 273 Location: Southlake, Tx.
|
Posted: Thu Jan 25, 2018 11:35 am Post subject: |
|
|
Anxious to see it on the road. It should be ready for the Lone Star Convention in May. See you there if not sooner. http://www.lonestarchevys.com/ |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
belairvette Bel Air
Joined: 18 Oct 2005 Posts: 159 Location: Granbury, Texas
|
Posted: Sat Jan 27, 2018 10:11 am Post subject: Ram Jet 350 |
|
|
I’m anxious and nervous to get the ‘55 on a long trip. Trying to work out all gremlins now but I know something will pop up time and again. Looking forward to club events and HRPT and Cruising The Coast... |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|