View previous topic :: View next topic |
Author |
Message |
reefrider 150 series
Joined: 08 Feb 2011 Posts: 22 Location: dallas tx
|
Posted: Mon Feb 21, 2011 10:56 pm Post subject: Electricale |
|
|
Hmm,Well here goes question.... Loll
Can i run a generatore with an electronic ignition system? OKayyy.. Im standn by to get blasted.Loll.. Take it away guys...
Thanks dave R. |
|
Back to top |
|
 |
acardon Bel Air
Joined: 12 Jul 2005 Posts: 273 Location: Southlake, Tx.
|
Posted: Tue Feb 22, 2011 12:39 pm Post subject: |
|
|
Dave, there's no reason you can't use an electronic distributor with a generator. DC voltage is DC voltage, no matter where it comes from. You may need to bypass/remove the ballest resistor, depending on the distributor and also upgrade the wire from the ignition switch to the coil or distributor. The stock wiring is pretty small gauge for a high voltage coil. I can help walk you through the wiring if you need it.
Don |
|
Back to top |
|
 |
reefrider 150 series
Joined: 08 Feb 2011 Posts: 22 Location: dallas tx
|
Posted: Tue Feb 22, 2011 3:02 pm Post subject: elecricale |
|
|
Don thanks for the reply back.Ill be gettn back with you as far as walkn through the wireing of distibutor and ignition. thanks a lot.
Dave R |
|
Back to top |
|
 |
|