View previous topic :: View next topic |
Author |
Message |
David Graves Site Admin
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Tue Jun 07, 2005 10:01 pm Post subject: Dyno Day - June 11th Saturday - Speedtek |
|
|
I have 5 participants that have committed to running on the dyno..
Tom Walker, 57 Chevy
Greg Hedum, 55 Chevy
Rodney Nevils, 56 Corvette
Jim Conkle, 55 Chevy
Dean Schmidt, 57 Chevy
we have 10 places reserved so 5 are available. if you want a spot, post here and your spot will be saved... $35 for 3 pulls on the dyno... |
|
Back to top |
|
|
fiftysixbowtie Bel Air
Joined: 06 Jun 2005 Posts: 67 Location: Plano
|
Posted: Thu Jun 09, 2005 12:36 pm Post subject: Dang!!! |
|
|
Unfortunately I can't make it. Going to Arkansas for a family thing. Is the $35 their normal price? If not, I'm wondering if I can buy a rain check? I could go next week then post my stats for all to see. _________________ John Rush |
|
Back to top |
|
|
Bill Preston Bel Air
Joined: 04 Jun 2005 Posts: 117 Location: Flower Mound
|
Posted: Thu Jun 09, 2005 2:58 pm Post subject: |
|
|
Will the meeting be at 11 am before the Dynotesting? _________________ Bill Preston |
|
Back to top |
|
|
David Graves Site Admin
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Thu Jun 09, 2005 3:35 pm Post subject: |
|
|
the normal fee is a bit higher.. they dont do rain checks
we will likely have our meeting at aprox 11AM.. then proceed with the Dyno pulls.. |
|
Back to top |
|
|
David Graves Site Admin
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Fri Jun 10, 2005 6:27 pm Post subject: |
|
|
Alan Strong added to the Dyno list |
|
Back to top |
|
|
David Graves Site Admin
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Mon Jun 13, 2005 9:28 am Post subject: |
|
|
anyone care to discuss their results - good/bad - any changes you will make from what you learned on the Dyno ?? |
|
Back to top |
|
|
57boxman Bel Air
Joined: 13 Jun 2005 Posts: 714 Location: The Colony, Texas
|
Posted: Mon Jun 13, 2005 10:20 pm Post subject: dyno results |
|
|
Here are my stats:
(Run conditions: 92.86 degrees F, 29.48 in=Hg, Humidity 18%)
Run 1 Max power = 222.63, Max Torque = 279.51
Run 2 Max power = 222.36, Max = 275.74
Run 3 Max power = 220.55, Max Torque = 276.80
My horse power stats I felt were a little disappointing. I thought I would be more at the top end of the 200s. I used my Gtech Pro and ran a best of 13.9 at 109. By using a house power calculator at this web page: http://www.race-cars.net/calculators/mph_calculator.html
I had calculated 300 horse power at the wheels and 380 at the wheels. Almost an 80 horse power difference from the 222 and change I ran today
I guess the motor is running ok. On the top end you can see a flutter because of week valve springs. I have a positive curve in horse power which is good. I am a little rich on fuel mixture at the top end. It was recommended that I change smaller one size in the secondary jets and 2 on the pump jet. Another guy told me jetting might not improve air fuel at the top end. He said, "That the bad valve springs are what's causing the fuel flow problem at the top end."
I wonder if that is good stats for a 383 cubic inch motor? _________________ Texas Classic Chevy Experience
http://www.texasclassicchevyexperience.com/ |
|
Back to top |
|
|
57boxman Bel Air
Joined: 13 Jun 2005 Posts: 714 Location: The Colony, Texas
|
Posted: Mon Jun 13, 2005 10:41 pm Post subject: |
|
|
I looked around the web at 383 stroker web sites. And unless they are big fat fibbers my 383 is underpowered. Most advertise 425 hp for thier 383.
At this site http://chevystroker.com/ they avertise a 2 bolt main 383 that will producing 300 hp. Mine has 4 bolt main.
What do you think _________________ Texas Classic Chevy Experience
http://www.texasclassicchevyexperience.com/ |
|
Back to top |
|
|
David Graves Site Admin
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Tue Jun 14, 2005 8:25 pm Post subject: |
|
|
I think that what is advertised or dyno'ed in a engine shop vs what the HP is actually at the rear wheels is going to be different, how much different I don't know... anytime I have seen these dyno events like we did, people are disappointed alot more than those that are not... it will be interesting to hear what adjustments if any people make based on this event... |
|
Back to top |
|
|
fiftysixbowtie Bel Air
Joined: 06 Jun 2005 Posts: 67 Location: Plano
|
Posted: Wed Jun 15, 2005 8:21 am Post subject: 383 Stroker |
|
|
Makes me wish I had been there to see what mine would have done. Or maybe not. I bought the 425hp version from www.strokermotor.com. Do I really want to get that disappointed? I'm kinda content with blowing away Mustangs when the light turns green. Ask Dean. I believe they are located near the Christian Cruisers car show so maybe I'll make an appointment on the same day. _________________ John Rush |
|
Back to top |
|
|
|