View previous topic :: View next topic |
Author |
Message |
David Graves Site Admin
![](http://www.dallasclassicchevy.com/images/00%20Misc%20personal/dag%20avatar.jpg)
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Mon Jan 03, 2011 11:35 pm Post subject: Specialty Tools Available From WRENCHES |
|
|
In this 'Sticky' section, posted will be a listing of specialty tools that can be borrowed for club members use. There will be a deposit required for each item, so that we don't loose them. These tools likely will belong to other club members who are offering them up for use, so please respect their use. All tool requests should be directed through Bill Preston or Don Andre (our WRENCHES coordinators). They will then contact the appropriate person about getting the tool available to you. ALSO, if you have a specialty tool that you think other club members may find useful, contact Bill or Don and let them know and we may list the tool here. To contact Bill or Don, email DallasClassicChevy@gmail.com and one of them will be in touch with you. _________________ In My Garage -
'55 Bel Air Hardtop
'55 Bel Air 2dr Sedan
'56 Corvette
'67 Camaro RS
'69 Blown 427 nostalgia front engine dragster
'17 Indian Chief Vintage
Last edited by David Graves on Thu May 20, 2021 1:49 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
David Graves Site Admin
![](http://www.dallasclassicchevy.com/images/00%20Misc%20personal/dag%20avatar.jpg)
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Mon Jan 03, 2011 11:52 pm Post subject: Tool for Body Lifting |
|
|
Marvin Cowden created this set of tools for lifting the body off of a frame. Deposit of $100 is required to use it, contact DallasClassicChevy@gmail.com to arrange to use this tool.
THANKS to Marvin for making this tool and offering it up to WRENCHES! _________________ In My Garage -
'55 Bel Air Hardtop
'55 Bel Air 2dr Sedan
'56 Corvette
'67 Camaro RS
'69 Blown 427 nostalgia front engine dragster
'17 Indian Chief Vintage
Last edited by David Graves on Thu May 20, 2021 1:47 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
David Graves Site Admin
![](http://www.dallasclassicchevy.com/images/00%20Misc%20personal/dag%20avatar.jpg)
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Wed Jan 19, 2011 7:30 pm Post subject: |
|
|
Here we have a tube flaring tool available along with a tube bender, the flaring tool produces top quality flairs on 3/16 tube to 5/8 tube, single and double flare, bender for 3/16 to 5/16 lines.
Deposit of $100 is required to use it, and like all tools contact DallasClassicChevy@gmail.com to arrange to use this tool.
![](http://www.dallasclassicchevy.com/images/flare.jpg) _________________ In My Garage -
'55 Bel Air Hardtop
'55 Bel Air 2dr Sedan
'56 Corvette
'67 Camaro RS
'69 Blown 427 nostalgia front engine dragster
'17 Indian Chief Vintage
Last edited by David Graves on Thu May 20, 2021 1:48 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
David Graves Site Admin
![](http://www.dallasclassicchevy.com/images/00%20Misc%20personal/dag%20avatar.jpg)
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Wed Jan 19, 2011 7:33 pm Post subject: |
|
|
Available is a Press, same requirements -
Deposit of $100 is required to use it, contact DallasClassicChevy@gmail.com to arrange to use this tool.
![](http://www.dallasclassicchevy.com/images/press.jpg) _________________ In My Garage -
'55 Bel Air Hardtop
'55 Bel Air 2dr Sedan
'56 Corvette
'67 Camaro RS
'69 Blown 427 nostalgia front engine dragster
'17 Indian Chief Vintage
Last edited by David Graves on Thu May 20, 2021 1:48 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
David Graves Site Admin
![](http://www.dallasclassicchevy.com/images/00%20Misc%20personal/dag%20avatar.jpg)
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Tue Feb 22, 2011 9:45 pm Post subject: |
|
|
Buffing setup, stand alone, has all required wheels, you will need to supply buffing compound and may need to replace a wheel or two, setup for stainless buffing
Deposit of $100, contact DallasClassicChevy@gmail.com to use.
![](http://www.dallasclassicchevy.com/images/buffer.jpg) _________________ In My Garage -
'55 Bel Air Hardtop
'55 Bel Air 2dr Sedan
'56 Corvette
'67 Camaro RS
'69 Blown 427 nostalgia front engine dragster
'17 Indian Chief Vintage
Last edited by David Graves on Thu May 20, 2021 1:48 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
David Graves Site Admin
![](http://www.dallasclassicchevy.com/images/00%20Misc%20personal/dag%20avatar.jpg)
Joined: 02 Jun 2005 Posts: 1384 Location: Warsaw, TX
|
Posted: Sat Nov 19, 2011 6:47 am Post subject: |
|
|
John Yoby has a body dolly available to any club member who needs it, to be used to move a car body around that has been taken off the frame
Deposit of $100, contact WRENCHES@DallasClassicChevy.com to use. _________________ In My Garage -
'55 Bel Air Hardtop
'55 Bel Air 2dr Sedan
'56 Corvette
'67 Camaro RS
'69 Blown 427 nostalgia front engine dragster
'17 Indian Chief Vintage |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
acardon Bel Air
Joined: 12 Jul 2005 Posts: 273 Location: Southlake, Tx.
|
Posted: Wed May 01, 2013 3:06 pm Post subject: Rotisserie Available for Loan. |
|
|
My rotisserie has just been emptied, after we took Bills 57 Corvetter frame off of it. If anyone wants to borrow it, let me know.
![](http://pic100.picturetrail.com/VOL678/4398712/9300251/327964882.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|