View previous topic :: View next topic |
Author |
Message |
55jlc 210 Series
Joined: 11 Aug 2005 Posts: 32 Location: Keller, Tx
|
Posted: Wed Jun 13, 2018 2:57 pm Post subject: '55 power steering header clearance |
|
|
I have a '55 with a 350 engine and Sanderson 3/4 length headers. I'm not finding them listed on the Sanderson website anymore. I want to change the original steering to power and am thinking the 500 series box. Does anyone know if there would be any clearance issues with these headers?
Thanks! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
acardon Bel Air
Joined: 12 Jul 2005 Posts: 273 Location: Southlake, Tx.
|
Posted: Thu Jun 14, 2018 7:12 am Post subject: |
|
|
Can you post a picture of the headers, looking down at the top of your steering box. Or we can take some measurements of the 500 box on my car. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
55jlc 210 Series
Joined: 11 Aug 2005 Posts: 32 Location: Keller, Tx
|
Posted: Thu Jun 14, 2018 1:15 pm Post subject: Picture of Steering box and headers |
|
|
[/img] |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
acardon Bel Air
Joined: 12 Jul 2005 Posts: 273 Location: Southlake, Tx.
|
Posted: Thu Jun 14, 2018 1:47 pm Post subject: |
|
|
I can't be sure but I think it will fit. I have Sanderson block huggers, but they are a simular design with the inside tubes (3 & 5) on the inboard side of the collector. I think the big part of the 500 box is a little forward of the stock box.
![](http://pic100.picturetrail.com/VOL678/4398712/19253433/413927735.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|